| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BOLT HOLE CIRCLE NOMINAL DIAMETER | 6.625 INCHES AXIALLY THROUGH HUB, FIRST END |
| BORE STYLE | W/COUNTERBORE COUNTER BORE, SECOND END |
| BORE NOMINAL DIAMETER | 5.8765 INCHES COUNTER BORE, SECOND END |
| COUNTERBORE NOMINAL DIAMETER | 9.8125 INCHES COUNTER BORE, SECOND END |
| COUNTERBORE NOMINAL DEPTH | 1.1250 INCHES COUNTER BORE, SECOND END |
| FACE NOMINAL WIDTH | 1.500 INCHES |
| HARDNESS RATING | 89.0 ROCKWELL B MINIMUM AND 96.0 ROCKWELL B MAXIMUM OVERALL |
| HELIX ANGLE | 27.3217 DEGREES |
| HUB STYLE DESIGNATOR | PLAIN FIRST END |
| HUB NOMINAL DIAMETER | 7.3750 INCHES FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE AND AISI/SAE 1035 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 1035 OVERALL |
| MOUNTING HOLE NOMINAL DIAMETER | 0.4060 INCHES AXIALLY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 4 PLAIN AXIALLY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.3750 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 11.0858 INCHES |
| SPECIAL FEATURES | 0.250 IN. HIGH FIG 6 ON CENTER LINE OF TOOTH 6 DEG 11 MIN FROM CENTER LINE OF GEAR,FOUR EQUALLY SPACED DOWEL HOLES 22 DEG 30 MIN CW FROM CENTER LINE OF GEAR ON 6.624 @TO @6.626 IN. DIA BOLT CIRCLE 1ST END OF GEAR |
| PITCH DIAMETER | 10.8000 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | PROTRUDING HUB |
| TEETH QUANTITY | 54 |
| TEETH TYPE | SINGLE HELIX |
| TOOTH FORM | STANDARD |
| TOOTH DIRECTION | RIGHT |