| ATTACHMENT METHOD | MOUNTING HOLE |
| BORE NOMINAL DIAMETER | 0.188 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| FACE NOMINAL WIDTH | 0.125 INCHES |
| HUB NOMINAL DIAMETER | 0.500 INCHES FIRST END |
| HUB STYLE DESIGNATOR | PINNED FIRST END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764 TYPE 303 COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| MOUNTING HOLE NOMINAL THREAD SIZE | 0.086 INCHES TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC TRANSVERSELY THROUGH HUB, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 1 THREADED TRANSVERSELY THROUGH HUB, FIRST END |
| NOMINAL DISTANCE BETWEEN FACE EDGE AND BODY END | 0.212 INCHES |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.225 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 1.5160 INCHES |
| NOMINAL OVERALL LENGTH | 0.562 INCHES |
| PITCH DIAMETER | 1.5000 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| STYLE DESIGNATOR | ADJUSTABLE TORQUE, SPRING WASHER LOADED |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 120 |
| TOOTH FORM | SPECIAL |
| TORQUE CAPACITY | 1.00 INCH-OUNCES MINIMUM AND 10.11 INCH-OUNCES MAXIMUM |