| ATTACHMENT METHOD | MOUNTING HOLE |
| BODY STYLE | PLAIN, SOLID |
| BORE NOMINAL DIAMETER | 0.250 INCHES BOTH ENDS |
| BORE STYLE | PLAIN BOTH ENDS |
| END NOMINAL DIAMETER | 0.187 INCHES FIRST END |
| END NOMINAL DIAMETER | 0.187 INCHES SECOND END |
| END NOMINAL LENGTH | 0.125 INCHES FIRST END |
| END NOMINAL LENGTH | 0.125 INCHES SECOND END |
| FACE NOMINAL WIDTH | 0.126 INCHES |
| FIRST STEP NOMINAL DIAMETER | 0.210 INCHES FIRST END |
| FIRST STEP NOMINAL DIAMETER | 0.210 INCHES SECOND END |
| FIRST STEP NOMINAL LENGTH | 0.309 INCHES SECOND END |
| FIRST STEP NOMINAL LENGTH | 0.375 INCHES FIRST END |
| HUB STYLE DESIGNATOR | 2 STEPS FIRST END |
| HUB STYLE DESIGNATOR | 1 STEP SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,TYPE 303-CANCELED FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-764,TYPE 303SE-CANCELED FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 303 OR STEEL COMP 303SE OVERALL |
| MOUNTING HOLE NOMINAL DIAMETER | 0.375 INCHES AXIALLY THROUGH BODY, FIRST END |
| MOUNTING HOLE TYPE AND QUANTITY | 4 PLAIN AXIALLY THROUGH BODY, FIRST END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.434 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.623 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 1.699 INCHES |
| PITCH DIAMETER | 1.6667 INCHES NOMINAL |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SECOND STEP NOMINAL DIAMETER | 0.310 INCHES FIRST END |
| SECOND STEP NOMINAL LENGTH | 0.123 INCHES FIRST END |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEETH QUANTITY | 120 |