|
|
|
National Stock Number:
3010-01-483-8535
Federal Supply Class:
3010
National Item Identification Number:
014838535
Description:
UNIVERSAL JOINT,NONVEHICULAR
Detail:
A FLEXIBLE CONNECTION DESIGNED FOR NONVEHICULAR APPLICATIONS WHICH PERMITS ROTARY MOTION TO BE TRANSMITTED BETWEEN TWO SHAFTS LOCATED AT AN ANGLE TO EACH OTHER. THE ANGLE BETWEEN THE SHAFTS MAY BE CONTINUALLY VARIED WITHIN CERTAIN LIMITS; THE CONNECTING ENDS MUST HAVE EITHER A FLANGE, HUB, OR SPLINED STUB SHAFT; THE PLAIN PORTION OF A SPLINED STUB SHAFT MUST NOT EXCEED THE LENGTH OF THE SPLINES. EXCLUDES DRIVE OR PROPELLER SHAFTS WITH JOINT(S) AT ONE OR BOTH ENDS. SEE UNIVERSAL JOINT,GEARED.
|
Manufacturer Information:
| 563-7067897-52 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 563-7067897-73 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7067897 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H696-1603-52 | 96169 | ELECTRIC BOAT CORPORATION | | H696-1603-73 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| CONNECTION END TYPE | HUB,STRAIGHT SPLINE SECOND END | | CONNECTION END TYPE | HUB,STRAIGHT SPLINE FIRST END | | DESIGN TYPE | BLOCK AND PIN | | HUB SPLINE QUANTITY | 10 FIRST END | | HUB SPLINE QUANTITY | 10 SECOND END | | INTERNAL HUB SPLINE MAJOR DIAMETER | 2.2480 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM FIRST END | | INTERNAL HUB SPLINE MAJOR DIAMETER | 2.4980 INCHES MINIMUM AND 2.5000 INCHES MAXIMUM SECOND END | | OVERALL LENGTH | 10.6300 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | JOINT, UNIVERSAL SINGLE | | SPECIAL FEATURES | BOTH HUBS ARE MODIFIED 10 SPLINE. BOTH HUBS ARE BORED 0.5000 DIA. THRU ONE SIDE |
|
|