| DUTY CYCLE | CONTINUOUS |
| ENCLOSURE FEATURE | OPEN |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 105.0 LINE TO NEUTRAL LOW OR 125.0 LINE TO NEUTRAL HIGH INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT TYPE | AC INPUT |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 0.500 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| FREQUENCY IN HERTZ | 50.0 OR 60.0 INPUT |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 1.125 INCHES SINGLE END |
| OVERALL HEIGHT | 2.750 INCHES |
| OVERALL LENGTH | 4.750 INCHES |
| OVERALL WIDTH | 2.781 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING METHOD | FACE |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.562 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.562 INCHES |
| PHASE | SINGLE INPUT |
| SHAFT END CHARACTERISTIC | A28 FIRST STYLE AND A12 SECOND STYLE SINGLE END |
| SHAFT DIAMETER | 0.248 INCHES NOMINAL FIRST END |
| SHAFT DIAMETER | 0.313 INCHES NOMINAL SECOND END |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| UNDERCUT CENTER TO SHAFT END DISTANCE | 0.063 INCHES NOMINAL SINGLE END |
| UNDERCUT DIAMETER | 0.236 INCHES NOMINAL SINGLE END |
| UNDERCUT LENGTH | 0.031 INCHES NOMINAL SINGLE END |
| WINDING TYPE | INDUCTION-SHADED POLE |
| STEP DIAMETER | 0.248 INCHES NOMINAL SINGLE END |
| STEP LENGTH | 0.706 INCHES NOMINAL SINGLE END |
| TEMP RATING | 0.0 OPERATING CELSIUS AND 38.0 OPERATING CELSIUS AND 50.0 AMBIENT CELSIUS |
| TERMINAL TYPE AND QUANTITY | 2 SOLDER LUG |
| TORQUE RATING AND TYPE | 10.0 INCH-POUNDS RUNNING |