|
|
|
National Stock Number:
3010-00-779-6321
Federal Supply Class:
3010
National Item Identification Number:
007796321
Description:
COUPLING,SHAFT,RIGID
Detail:
A DEVICE FOR CONNECTING THE ENDS OF TWO SHAFTS TO PRODUCE IN EFFECT, ONE PIECE OF RIGID SHAFTING SO THAT THE ROTARY MOTION OF ONE SHAFT IS TRANSMITTED TO THE OTHER SHAFT. COUPLINGS OF THE SLEEVE TYPE MUST HAVE AN OVER-ALL LENGTH EXCEEDING THE OUTSIDE DIAMETER, OR MUST HAVE AN INTERNAL SPLINE.
|
Manufacturer Information:
| CS3010-0003 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | W212C185X1 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | W212C185X1 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | W212C185X7 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | W246249 | 30760 | INGERSOLL RAND CO |
|
Techincal Specification:
| BODY MATERIAL | STEEL COMP 1042 | | BORE DIAMETER | 1.6250 INCHES MINIMUM AND 1.6260 INCHES MAXIMUM FIRST END | | BORE DIAMETER | 1.8730 INCHES MINIMUM AND 1.8740 INCHES MAXIMUM SECOND END | | BORE LENGTH | 2.6200 INCHES MINIMUM AND 2.6220 INCHES MAXIMUM SECOND END | | BORE SHAPE | STRAIGHT FIRST END | | BORE LENGTH | 2.9620 INCHES MINIMUM AND 2.9640 INCHES MAXIMUM FIRST END | | FEATURES PROVIDED | KEYWAY AND BORE COUNTERBORE | | OVERALL DIAMETER | 6.249 INCHES MINIMUM AND 6.250 INCHES MAXIMUM | | OVERALL LENGTH | 7.930 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 1042 ASSN STD SINGLE MATERIAL RESPONSE | | SPECIAL FEATURES | COUNTERBORE DIAMETER: BOTH ENDS, 2.560 IN. NOMINAL; COUNTERBORE DEPTH: FIRST END, 1.406 MINIMUM AND 1.408 IN. MAXIMUM; SECOND END, 0.938 IN. MINIMUM AND 0.940 IN. MAXIMUM; DISTANCE FROM CENTER OF BORE TO BOTTOM OF KEYWAY: FIRST END, 0.908 IN. MINIMUM AND 0.914 IN. MAXIMUM; SECOND END, 1.064 IN. MINIMUM AND 1.069 IN. MAXIMUM; FLANGE WIDTH: 1.860 IN. NOMINAL; HUB DIAMETER: 3.250 IN. NOMINAL; 1 KEYING FACILITY PROVIDED BOTH ENDS; KEYING FACILITY WIDTH: FIRST END, 0.375 IN. MINIMUM AND 0.380 IN. MAXIMUM; SECOND END, 0.500 IN. MINIMUM AND 0.510 IN. MAXIMUM | | STYLE DESIGNATOR | DOUBLE CONE FLANGE COMPRESSION |
|
|