| DUTY CYCLE | CONTINUOUS |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AMBIENT AIR |
| CURRENT RATING METHOD | LOAD |
| CURRENT RATING IN AMPS | 0.350 SINGLE OUTPUT |
| CURRENT TYPE | AC INPUT |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | INLINE W/ARMATURE SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 70.000 LOW REVOLUTIONS PER MINUTE SINGLE END AND 90.000 HIGH REVOLUTIONS PER MINUTE SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| FLAT DEPTH | 0.016 INCHES NOMINAL SINGLE END |
| FLATTED PORTION LENGTH | 0.375 INCHES MINIMUM SINGLE END |
| FREQUENCY IN HERTZ | 400.0 INPUT |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| OVERALL HEIGHT | 1.445 INCHES |
| OVERALL LENGTH | 3.945 INCHES |
| OVERALL WIDTH | 1.445 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.500 INCHES SINGLE END |
| MAXIMUM OPERATING ALTITUDE RATING | 50000.0 FEET |
| MOUNTING FACILITY CIRCLE DIAMETER | 1.530 INCHES |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING METHOD | FLANGE |
| SHAFT END CHARACTERISTIC | A5 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.2494 INCHES MINIMUM SINGLE END AND 0.2497 INCHES MAXIMUM SINGLE END |
| SHAFT ROTATION DIRECTION | CLOCKWISE SINGLE END OR COUNTERCLOCKWISE SINGLE END |
| PHASE | SINGLE INPUT |
| SPECIAL FEATURES | SHAFT HAS ADDITIONAL FLAT AT 90.0 DEG |
| TORQUE RATING AND TYPE | 15.0 INCH-OUNCES STARTING |
| WINDING TYPE | SYNCHRONOUS SPLIT PHASE |
| TEMP RATING | -55.0 OPERATING DEG CELSIUS AND 71.0 OPERATING DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |