| DUTY CYCLE | INTERMITTENT |
| ANGLE OF SHAFT TO MOUNTING BASE | 90.0 DEGREES SINGLE END |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 27.5 LINE TO NEUTRAL SINGLE INPUT |
| COOLING METHOD | AIR TO AIR COOLED |
| CURRENT RATING IN AMPS | 0.250 SINGLE OUTPUT |
| CURRENT RATING METHOD | LOAD |
| CURRENT TYPE | DC INPUT |
| GEARED HEAD OUTPUT SHAFT ALIGNMENT POSITION | ANGLED TO ARMATURE/ROTOR AXIS SINGLE END |
| GEARED HEAD OUTPUT SHAFT SPEED RATING | 33.000 SINGLE REVOLUTIONS PER MINUTE SINGLE END |
| HOLE CENTER TO SHAFT END DISTANCE | 0.0940 INCHES NOMINAL SINGLE END |
| HOLE DEPTH | 0.1870 INCHES NOMINAL SINGLE END |
| HOLE DIAMETER | 0.0620 INCHES NOMINAL SINGLE END |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| LENGTH OF SHAFT FROM HOUSING | 0.550 INCHES SINGLE END |
| OVERALL HEIGHT | 1.375 INCHES |
| OVERALL LENGTH | 3.385 INCHES |
| OVERALL WIDTH | 1.124 INCHES |
| MAXIMUM OPERATING ALTITUDE RATING | 75000.0 FEET |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| MOUNTING METHOD | PAD |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.812 INCHES |
| NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.812 INCHES |
| SHAFT END CHARACTERISTIC | A13 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.1874 INCHES NOMINAL SINGLE END |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE SINGLE END |
| SPEED CONTROL METHOD AND DEVICE TYPE | AUTOMATIC REMOTE |
| WINDING TYPE | SERIES WOUND |
| TEMP RATING | -55.0 OPERATING CELSIUS AND 85.0 OPERATING CELSIUS |
| TERMINAL TYPE AND QUANTITY | 2 SOLDER LUG |
| TIME INTERVAL | 2.0 SECONDS MAXIMUM ON AND 3.0 SECONDS MINIMUM OFF |
| TORQUE RATING AND TYPE | 2.0 INCH-POUNDS RUNNING AND 2.5 INCH-POUNDS STALLED AND 2.5 INCH-POUNDS STARTING |