|
|
|
National Stock Number:
3010-00-528-1935
Federal Supply Class:
3010
National Item Identification Number:
005281935
Description:
COUPLING,SHAFT,RIGID
Detail:
A DEVICE FOR CONNECTING THE ENDS OF TWO SHAFTS TO PRODUCE IN EFFECT, ONE PIECE OF RIGID SHAFTING SO THAT THE ROTARY MOTION OF ONE SHAFT IS TRANSMITTED TO THE OTHER SHAFT. COUPLINGS OF THE SLEEVE TYPE MUST HAVE AN OVER-ALL LENGTH EXCEEDING THE OUTSIDE DIAMETER, OR MUST HAVE AN INTERNAL SPLINE.
|
Manufacturer Information:
| 3170458REVA | 53711 | NAVAL SEA SYSTEMS COMMAND | | 3170458REVA | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 3170461REVBPC185 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 3170461REVBPC185 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 350C185X1 | 30760 | INGERSOLL RAND CO | | 350C185X7 | 0UBG9 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 350C185X7 | 30760 | INGERSOLL RAND CO | | 350C185X7 | 88032 | CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION | | 575-5600-1444272REVAPC185SH3 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 575-5600-1444272REVAPC185SH3 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | 578-5600-1574628REVAPC185SH3 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 578-5600-1574628REVAPC185SH3 | 80064 | NAVAL SHIP SYSTEMS COMMAND | | W241471 | 30760 | INGERSOLL RAND CO | | W242191APC185 | 30760 | INGERSOLL RAND CO | | W242778PC185SH3 | 30760 | INGERSOLL RAND CO | | W244316REVAPC185 | 30760 | INGERSOLL RAND CO | | W244317PC185 | 30760 | INGERSOLL RAND CO | | W244327REVAPC185SH3 | 30760 | INGERSOLL RAND CO |
|
Techincal Specification:
| BODY MATERIAL | STEEL | | BORE DIAMETER | 1.2480 INCHES MINIMUM AND 1.2490 INCHES MAXIMUM SECOND END | | BORE DIAMETER | 1.2500 INCHES MINIMUM AND 1.2510 INCHES MAXIMUM FIRST END | | BORE LENGTH | 2.8130 INCHES NOMINAL SECOND END | | BORE LENGTH | 3.4380 INCHES NOMINAL FIRST END | | BORE SHAPE | STRAIGHT FIRST END | | FEATURES PROVIDED | KEYWAY AND BORE COUNTERBORE | | OVERALL DIAMETER | 3.437 INCHES NOMINAL | | OVERALL LENGTH | 6.250 INCHES NOMINAL | | SPECIAL FEATURES | COUNTERBORE DIAMETER: FIRST END, 1.620 IN. MINIMUM AND 1.625 IN. MAXIMUM; SECOND END, 1.625 IN. MINIMUM AND 1.630 IN. MAXIMUM; COUNTERBORE DEPTH: FIRST END, 1.001 IN. MINIMUM AND 1.003 IN. MAXIMUM; SECOND END, 0.876 IN. MINIMUM AND 0.878 IN. MAXIMUM; DISTANCE FROM CENTER OF BORE TO BOTTOM OF KEYWAY: FIRST END, 0.786 IN. NOMINAL, SECOND END, 0.785 IN. NOMINAL; FURNISHED ITEMS: CAP SCREWS 4, BLOCK WASHERS 4, NUTS 2, PIN, GROOVED 1, RING, CENTERING 1, SETSCREW 1, SNAP RING 1; 1 KEYING FACILITY PROVIDED AT EACH END; KEYING FACILITY WIDTH: BOTH ENDS, 0.313 IN. NOMINAL | | STYLE DESIGNATOR | DOUBLE CONE SLEEVE COMPRESSION | | UNTHREADED HOLE QUANTITY | 1 |
|
|