| BAFFLE QUANTITY | 3 |
| BODY SHAPE | ROUND |
| COOLANT TYPE | AIR |
| DESIGN TYPE | DRY |
| FSC APPLICATION DATA | EXHAUST SYSTEM,ENGINE,NON-AIRCRAFT |
| INLET CONNECTION TYPE | UNTHREADED 1ST INLET |
| INLET CONNECTION TYPE | UNTHREADED 2ND INLET |
| INLET INSIDE DIAMETER | 1.0310 INCHES NOMINAL 2ND INLET |
| INLET INSIDE DIAMETER | 1.031 INCHES NOMINAL 1ST INLET |
| INLET LOCATION | CENTRALLY LOCATED IN END OF BODY FOR NO. 4 CYL 4TH INLET |
| INLET LOCATION | ON OD OF BODY 1.125 IN. FROM END OF BODY FOR NO. 2 CYL 2ND INLETCENTRALLY LOCATED IN END SECTION OF BODY FOR NO. 4. CYL;ON OD OF BODY 1.125 IN. FROM END OF BODY FOR NO. 2 CYL SINGLE INLET |
| INLET OUTSIDE DIAMETER | 1.125 INCHES NOMINAL 1ST INLET |
| INLET OUTSIDE DIAMETER | 1.1250 INCHES NOMINAL 2ND INLET |
| INLET PROJECTION LENGTH | 1.625 INCHES NOMINAL 1ST INLET |
| INLET PROJECTION LENGTH | 1.875 INCHES NOMINAL 2ND INLET |
| OPERATING POSITION | HORIZONTAL |
| OUTLET CONNECTION TYPE | UNTHREADED 1ST OUTLET |
| OUTLET FLANGE MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL |
| OUTLET FLANGE MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL 1ST OUTLET |
| OUTLET FLANGE MOUNTING PROVISION AND QUANTITY | 2 HOLES |
| OUTLET FLANGE MOUNTING PROVISION AND QUANTITY | 2 HOLES 1ST OUTLET |
| OUTLET PROJECTION LENGTH | 1.875 INCHES NOMINAL |
| OUTLET PROJECTION LENGTH | 1.875 INCHES NOMINAL 1ST OUTLET |
| OUTLET FLANGE SHAPE | OVAL 1ST OUTLET |
| OUTLET INSIDE DIAMETER | 0.937 INCHES NOMINAL 1ST OUTLET0.937 INCHES NOMINAL |
| OUTLET LOCATION | LOCATED ON OD OF BODY 2.000 IN. FROM BOTTOM 1ST OUTLET |
| OUTLET OUTSIDE DIAMETER | 1.000 INCHES NOMINAL |
| OUTLET OUTSIDE DIAMETER | 1.000 INCHES NOMINAL 1ST OUTLET |
| OVERALL DIAMETER | 4.250 INCHES NOMINAL |
| OVERALL LENGTH | 12.000 INCHES NOMINAL |
| MATERIAL | STEEL |
| MUFFLER DESIGN | BAFFLE |
| SPECIAL FEATURES | TWO MTG BRACKETS WELDED TO OD OF MUFFLER BODY |
| TUBE QUANTITY | 1 |
| SURFACE TREATMENT | PAINT |