|
|
|
National Stock Number:
2945-01-540-6706
Federal Supply Class:
2945
National Item Identification Number:
015406706
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 785422-3 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| DROP PRESSURE | 6.0 POUNDS PER SQUARE INCH | | DIFFERENTIAL PRESSURE | 250.0 POUNDS PER SQUARE INCH | | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY-CARTRIDGE, FILTER | | MATERIAL | RUBBER BUNA N SEAL | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | SPECIAL FEATURES | FLOW CAPACITY WITH MIL-H-5606 @ 170 DEGREES F + OR - 10 DEGREES F: 5 GPM;MAX PARTICLE PASSED: 40 MICRONS;CLEAN ELEMENT PRESSURE DROP AT FLOW CAPACITY: 6 PSI. | | TEMP RATING | 170.0 FAHRENHEIT NOMINAL |
|
|