|
|
|
National Stock Number:
2945-01-267-7461
Federal Supply Class:
2945
National Item Identification Number:
012677461
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1046059 | 81996 | U S ARMY AVIATION AND MISSILE COMMAND | | 91318 | 06177 | PNEUDRAULICS, INC. | | 9230A6873 | 1ZKD0 | 2IS INC. |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | BODY DIAMETER | 2.110 INCHES NOMINAL | | BODY THICKNESS | 0.032 INCHES NOMINAL | | FILTERING MEDIA DESIGN | SINTERED SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | STEEL COMP 304 FILTERING MEDIUM | | III STYLE DESIGNATOR | ROUND (BASICALLY FLAT) | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FILTERING MEDIUM | | SURFACE TREATMENT | PASSIVATE FILTERING MEDIUM |
|
|