|
|
|
National Stock Number:
2940-01-563-4743
Federal Supply Class:
2940
National Item Identification Number:
015634743
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| SE.75472311 | 05779 | PARKER-HANNIFIN CORPORATION | | SS1.D8B1BP | 05779 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| DROP PRESSURE | 3.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 5.910 INCHES NOMINAL | | BODY OVERALL LENGTH | 8.350 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 0.2 BAR | | FEATURES PROVIDED | BY-PASS VALVE | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | BY-PASS FLOW | | FLOW DIRECTION | INSIDE OUT OR OUTSIDE IN | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FILTER ELEMENT | | MATERIAL | STEEL COMP 316 FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | MESH SIZE | 125.0 | | NOMINAL THREAD SIZE | 2.500 INCHES | | SPECIAL FEATURES | SUCTION STRAINER;TUBE AND ENDCAP-ZINTEC;HEAD-GLASS FILLED NYLON;MEDIA-STAINLESS STEEL | | STYLE DESIGNATOR | SUMP TYPE | | SUPPLEMENTARY FEATURES | NOMINAL FLOW GPM 92 (LPM 350);MOUNTING HX C 3.54 INCHES | | TEMP RATING | 195.0 FAHRENHEIT MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | NPT |
|
|