|
|
|
National Stock Number:
2940-00-001-7717
Federal Supply Class:
2940
National Item Identification Number:
000017717
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 3545 | 37099 | LUBER-FINER INC SUB OF CHAMPION LABORATORIES INC AFFIL OF UIS INC | | LP1000 | 37099 | LUBER-FINER INC SUB OF CHAMPION LABORATORIES INC AFFIL OF UIS INC | | LP1000 | 50284 | CHAMPION LABORATORIES, INC. | | PV1010L | 12658 | BALDWIN FILTERS INC |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | BODY DIAMETER | 7.500 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.875 INCHES NOMINAL | | BODY OVERALL LENGTH | 15.250 INCHES NOMINAL | | MATERIAL | METAL CONTAINER/CARTRIDGE | | PAPER FILTERING MEDIUM | | RUBBER SYNTHETIC SEAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | DROP PRESSURE | 8.0 POUNDS PER SQUARE INCH | | DIFFERENTIAL PRESSURE | 100.0 POUNDS PER SQUARE INCH | | SPECIAL FEATURES | DUAL STAGE-FULL FLOW AND BY PASS FLOW-COMBINED DESIGN FILTRATION ELEMENT; FULL FLOW RATED AT 20 TO 30-GPM AND BYPASS FLOW RATED AT 2-GPM |
|
|