5305-00-995-1524 SCREW,MACHINE Index 4930-00-995-1535 COLLAR,THROW OUT

National Stock Number:
2920-00-995-1534

Federal Supply Class:
2920

National Item Identification Number:
009951534

Description:
GENERATOR,ENGINE ACCESSORY

Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.


Manufacturer Information:
110598816764GENERAL MOTORS CORP DELCO REMY DIV
11059881LW55BORGWARNER PDS (ANDERSON), L.L.C.
110598824617GENERAL MOTORS CORP
110598861928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT
434798292392ALLIS-CHALMERS CORP


Techincal Specification:
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.500 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3.875 INCHES NOMINAL
DISTANCE FROM END TO KEYWAY CENTER1.140 INCHES NOMINAL
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG13.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG159.0
ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT1900
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET8.123 INCHES MINIMUM AND 8.137 INCHES MAXIMUM
FURNISHED ITEMSWOODRUFF KEY
FSC APPLICATION DATAENGINE ELECTRICAL SYSTEM,NONAIRCRAFT
GROUND POLARITY TYPENEGATIVE OR POSITIVE
GROUNDING METHODEXTERNAL
KEYWAY LENGTH0.625 INCHES NOMINAL
KEYWAY WIDTH0.125 INCHES NOMINAL
MAXIMUM OUTPUT CURRENT RATING IN AMPS18.0
MOUNTING HOLE THREAD DIAMETER0.375 INCHES NOMINAL
MOUNTING HOLE THREAD CLASS2B
MOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
MOUNTING HOLE THREAD QUANTITY PER INCH16
MOUNTING HOLE THREAD SERIES DESIGNATORUNC
SECOND STEP DIAMETER0.6684 INCHES MINIMUM AND 0.669 INCHES MAXIMUM
SHAFT DRIVE END STYLESTRAIGHT SHAFT END, THREADED, W/KEYWAY
SHAFT ROTATION DIRECTIONCLOCKWISE
UNTHREADED PORTION LENGTH1.280 INCHES MINIMUM AND 1.340 INCHES MAXIMUM
VOLTAGE IN VOLTS24.0
SUBMERSIBILITYNONSUBMERSIBLE
THREAD DIAMETER0.669 INCHES NOMINAL
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.460 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
THREAD PITCH DIAMETERS+0.6324 TO 0.6365 INCHES
THREAD SERIESUNS
THREAD QUANTITY PER INCH20
TOP MOUNTING HOLE DIAMETER0.453 INCHES NOMINAL


Click here to Register for Free 30-day Trial