2920-00-994-0924 LEAD,IGNITION,ENGINE Index 5330-00-994-0928 SEAL,HOIST

National Stock Number:
2920-00-994-0926

Federal Supply Class:
2920

National Item Identification Number:
009940926

Description:
GENERATOR,ENGINE ACCESSORY

Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.


Manufacturer Information:
110515516764GENERAL MOTORS CORP DELCO REMY DIV
11051551LW55BORGWARNER PDS (ANDERSON), L.L.C.
110515561928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT
11051557X677GENERAL MOTORS LLC
1S015011083CATERPILLAR INC
1S15011083CATERPILLAR INC
IPD1S015055883INDUSTRIAL PARTS DEPOT INC


Techincal Specification:
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.500 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3.500 INCHES NOMINAL
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG0.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG180.0
BOTTOM MOUNTING HOLE DIAMETER0.524 INCHES NOMINAL
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET7.118 INCHES MINIMUM AND 7.136 INCHES MAXIMUM
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET8.238 INCHES MINIMUM AND 8.256 INCHES MAXIMUM
FURNISHED ITEMSLOCKWASHER AND NUT AND WOODRUFF KEY
GROUNDING METHODEXTERNAL
KEYWAY LENGTH0.750 INCHES NOMINAL
KEYWAY WIDTH0.156 INCHES NOMINAL
MOUNTING HOLE THREAD DIAMETER0.438 INCHES NOMINAL
MOUNTING HOLE THREAD CLASS2B
MOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
MOUNTING HOLE THREAD QUANTITY PER INCH14
MOUNTING HOLE THREAD SERIES DESIGNATORUNC
MOUNTING STYLEBRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED
SECOND STEP DIAMETER0.874 INCHES NOMINAL
SHAFT DRIVE END STYLESTRAIGHT SHAFT END, THREADED, W/KEYWAY
SHAFT ROTATION DIRECTIONCLOCKWISE
UNTHREADED PORTION LENGTH1.320 INCHES NOMINAL
VOLTAGE IN VOLTS12.0
SUBMERSIBILITYNONSUBMERSIBLE
THREAD CLASS2A
THREAD DIAMETER0.625 INCHES NOMINAL
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.840 INCHES NOMINAL
THREAD SERIESUNF
THREAD QUANTITY PER INCH18


Click here to Register for Free 30-day Trial