1377-00-992-0831 CATAPULT,AIRCRAFT EJECTION SEAT Index 2920-00-992-0834 DRIVE,ENGINE,ELECTRICAL STARTER

National Stock Number:
2920-00-992-0833

Federal Supply Class:
2920

National Item Identification Number:
009920833

Description:
GENERATOR,ENGINE ACCESSORY

Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.


Manufacturer Information:
110203016764GENERAL MOTORS CORP DELCO REMY DIV
11020301LW55BORGWARNER PDS (ANDERSON), L.L.C.
110203024617GENERAL MOTORS CORP
110203061928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT
110203098316ETHERIDGE H J AND ASSOCIATES INC
110207216764GENERAL MOTORS CORP DELCO REMY DIV
11020721LW55BORGWARNER PDS (ANDERSON), L.L.C.
120117A30076HYSTER-YALE GROUP, INC.
3501010695TAYLOR-DUNN CORPORATION DBA METRO CROWN INTERNATIONAL


Techincal Specification:
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG193.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG167.0
BOTTOM MOUNTING HOLE DIAMETER0.316 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET7.115 INCHES MINIMUM AND 7.139 INCHES MAXIMUM
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET7.935 INCHES MINIMUM AND 7.959 INCHES MAXIMUM
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.062 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3.060 INCHES NOMINAL
GROUNDING METHODINTERNAL
KEYWAY LENGTH0.625 INCHES NOMINAL
KEYWAY WIDTH0.125 INCHES NOMINAL
MOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
MOUNTING HOLE THREAD DIAMETER0.312 INCHES NOMINAL
MOUNTING HOLE THREAD QUANTITY PER INCH18
MOUNTING HOLE THREAD SERIES DESIGNATORUNC
MOUNTING STYLEBRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED
SECOND STEP DIAMETER0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM
SHAFT DRIVE END STYLESTRAIGHT SHAFT END, THREADED, W/KEYWAY
SHAFT ROTATION DIRECTIONCLOCKWISE
SUBMERSIBILITYNONSUBMERSIBLE
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.490 INCHES NOMINAL
THREAD SERIESUNS
UNTHREADED PORTION LENGTH0.810 INCHES NOMINAL
VOLTAGE IN VOLTS12.0


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us