2920-00-675-1302 GENERATOR,ENGINE ACCESSORY Index 6150-00-675-1307 CABLE ASSEMBLY,SPECIAL PURPOSE,E

National Stock Number:
2920-00-675-1304

Federal Supply Class:
2920

National Item Identification Number:
006751304

Description:
GENERATOR,ENGINE ACCESSORY

Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.


Manufacturer Information:
110282916764GENERAL MOTORS CORP DELCO REMY DIV
11028291LW55BORGWARNER PDS (ANDERSON), L.L.C.
110282924617GENERAL MOTORS CORP
110282961928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT


Techincal Specification:
DISTANCE FROM END TO KEYWAY CENTER0.910 INCHES NOMINAL
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG0.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG196.0
BOTTOM MOUNTING HOLE DIAMETER0.320 INCHES NOMINAL
DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET7.127 INCHES NOMINAL
DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET7.887 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.062 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3.062 INCHES NOMINAL
ENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND FUNGUS RESISTANT
GROUNDING METHODEXTERNAL
KEYWAY LENGTH0.625 INCHES NOMINAL
KEYWAY WIDTH0.125 INCHES NOMINAL
MAXIMUM OUTPUT CURRENT RATING IN AMPS18.0
MAXIMUM RATED ARMATURE SPEED IN RPM1600
MOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
MOUNTING HOLE THREAD CLASS2B
MOUNTING HOLE THREAD DIAMETER0.312 INCHES NOMINAL
MOUNTING HOLE THREAD QUANTITY PER INCH18
MOUNTING HOLE THREAD SERIES DESIGNATORUNC
MOUNTING STYLEBRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED
RECTIFIER LOCATIONSEPARATE
SECOND STEP DIAMETER0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM
SHAFT DRIVE END STYLESTRAIGHT SHAFT END, THREADED, W/KEYWAY
SHAFT ROTATION DIRECTIONCLOCKWISE
SUBMERSIBILITYNONSUBMERSIBLE
THREAD CLASS2A
THREAD DIAMETER0.500 INCHES NOMINAL
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.500 INCHES NOMINAL
THREAD SERIESUNF
THREAD QUANTITY PER INCH20
UNTHREADED PORTION LENGTH0.750 INCHES NOMINAL
VOLTAGE IN VOLTS6.0


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us