|
|
|
National Stock Number:
2920-00-640-7873
Federal Supply Class:
2920
National Item Identification Number:
006407873
Description:
RELAY-SOLENOID,ENGINE STARTER,EL
Detail:
AN ITEM HAVING A MOVING PLUNGER TYPE CORE WHICH TRAVELS PARALLEL TO THE LONGITUDINAL AXIS OF THE COIL(S), AND WHICH IS PRIMARILY DESIGNED TO PERFORM THE DUAL FUNCTION OF CLOSING THE CIRCUIT OF A STARTER, ENGINE, ELECTRICAL AND ACTUATING THE STARTER ENGAGING MECHANISM. IT MUST HAVE PROVISIONS FOR ATTACHING THE MECHANICAL LINKAGE FOR ACTUATING THE ENGAGING MECHANISM IF THE LINKAGE IS NOT INCLUDED. MAY HAVE PROVISIONS FOR MANUAL ACTUATION. WITHOUT CONTACTS THIS ITEM IS KNOWN AS A SOLENOID, ELECTRICAL. WITHOUT PROVISIONS FOR ATTACHING MECHANICAL LINKAGE THIS ITEM IS KNOWN AS A RELAY, ELECTROMAGNETIC. SEE ALSO SWITCH, ENGINE STARTER, ELECTRICAL.
|
Manufacturer Information:
| 1115574 | 077S2 | DELCO REMY AMERICA INC | | 1115574 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1115574 | 61928 | GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT | | 1115574 | 7X677 | GENERAL MOTORS LLC | | 1118049 | 077S2 | DELCO REMY AMERICA INC | | 1118049 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1118080 | 077S2 | DELCO REMY AMERICA INC | | 1118080 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1119804 | 18859 | DUPLEX DIV WARNER AND SWASEY CO | | 1119804 | 24617 | GENERAL MOTORS CORP | | 1119804 | 61928 | GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT | | 1119849 | 077S2 | DELCO REMY AMERICA INC | | 1119849 | 16764 | GENERAL MOTORS CORP DELCO REMY DIV | | 1119849 | 61928 | GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT | | 1119849 | 7X677 | GENERAL MOTORS LLC | | 7-973 | 077S2 | DELCO REMY AMERICA INC |
|
Techincal Specification:
| ACCOMMODATED LINKAGE THREADED HOLE THREAD SIZE | 3/8-20 | | CONTACT MANUAL CLOSING PROVISION | NOT INCLUDED | | CONTROL TERMINAL QUANTITY | 2 | | CONTROL TERMINAL TYPE | STUD | | CONTROL TERMINAL QUANTITY INTERNALLY CONNECTED TO MAIN TERMINAL | 1 | | ENGAGING LINKAGE | NOT INCLUDED | | GROUNDED CONTROL TERMINAL | NOT INCLUDED | | HOLD-IN CURRENT | 5.1 AMPERES MINIMUM AND 5.5 AMPERES MAXIMUM | | MAIN TERMINAL QUANTITY | 2 | | MAIN TERMINAL TYPE | STUD | | MOTOR DIAMETER FOR WHICH RIGID MOUNT IS DESIGNED | 4.938 INCHES NOMINAL | | MOUNTING FACILITY TYPE AND QUANTITY | 4 HOLE | | MOUNTING FACILITY SPACING | 1.750 IN. C TO C 68 DEG APART ON 4.938 IN. BOLT CIRCLE | | MOUNTING HOLE DIAMETER | 0.344 INCHES NOMINAL | | NOMINAL VOLTAGE RATING | 32.0 VOLTS | | PLUNGER STROKE LENGTH | 0.750 INCHES NOMINAL | | SPECIAL FEATURES | SPECIAL CORROSION RESISTANT TREATMENT | | SUBMERSIBILITY | NONSUBMERSIBLE |
|
|