2910-00-137-1957 FILTER ELEMENT,FLUID Index 4330-00-137-1960 PARTS KIT,AIR FILTER

National Stock Number:
2920-00-137-1958

Federal Supply Class:
2920

National Item Identification Number:
001371958

Description:
GENERATOR,ENGINE ACCESSORY

Detail:
A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of GENERATING SETS. For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.


Manufacturer Information:
110079116764GENERAL MOTORS CORP DELCO REMY DIV
110088316764GENERAL MOTORS CORP DELCO REMY DIV
11008831LW55BORGWARNER PDS (ANDERSON), L.L.C.
110088361928GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT
11008837X677GENERAL MOTORS LLC
397091R9192679NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/
532176R9192679NAVISTAR INTL CORP MELROSE PARK ENGINE PLANT LOCATION /MELROSE PARK/


Techincal Specification:
ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG0.0
ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG180.0
BOTTOM MOUNTING HOLE DIAMETER0.380 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER3.330 INCHES NOMINAL
DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER3.330 INCHES NOMINAL
FURNISHED ITEMSLOCKWASHER AND NUT
GROUND POLARITY TYPENEGATIVE
MAXIMUM OUTPUT CURRENT RATING IN AMPS61.0
MOUNTING HOLE THREAD DIRECTIONRIGHT-HAND
MOUNTING HOLE THREAD CLASS2B
MOUNTING HOLE THREAD DIAMETER0.312 INCHES NOMINAL
MOUNTING HOLE THREAD QUANTITY PER INCH18
MOUNTING HOLE THREAD SERIES DESIGNATORUNC
MOUNTING STYLEFLANGE MTD W/TWO MTG HOLES, TOP HOLE THREADED
PILOT HEIGHT0.390 INCHES NOMINAL
RECTIFIER LOCATIONSEPARATE
SECOND STEP DIAMETER0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM
SHAFT DRIVE END STYLESTRAIGHT SHAFT END, THREADED
SHAFT ROTATION DIRECTIONCLOCKWISE OR COUNTERCLOCKWISE
SPECIAL FEATURESHEX HOLE IN SHAFT END
UNTHREADED PORTION LENGTH0.740 INCHES MINIMUM AND 0.840 INCHES MAXIMUM
VOLTAGE IN VOLTS12.0
SUBMERSIBILITYNONSUBMERSIBLE
THREAD CLASS2A
THREAD DIAMETER0.625 INCHES NOMINAL
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.450 INCHES NOMINAL
THREAD QUANTITY PER INCH18
THREAD SERIESUNC


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us