|
|
|
National Stock Number:
2915-01-353-1360
Federal Supply Class:
2915
National Item Identification Number:
013531360
Description:
DIAPHRAGM,ACTUATOR VALVE,SPECIAL
Detail:
An item constructed of one or more layers of thin flexible material, either laminated or separated, designed to form a tight seal between the chambers of a valve, and to transmit pressure inducted motion to a valve disk either directly or through a mechanical linkage. The surface of the item must be formed or molded to have a beaded or rolled edge, ribs or any other raised surfaces. The item may contain bolt holes and/or center holes. Excludes DIAPHRA GM, VALVE, FLAT and GASKET.
|
Manufacturer Information:
| 4-100-50-CDG-1 | 01170 | BELLOFRAM CORPORATION | | 82593-1 | 07148 | UNITED TECHNOLOGIES CORP HAMILTON SUNDSTRAND CORP | | 82593-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| CENTER HOLE DIAMETER | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | OUTSIDE DIAMETER | 1.972 INCHES MINIMUM AND 1.992 INCHES MAXIMUM | | OVERALL HEIGHT | 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM | | MATERIAL THICKNESS | 0.015 INCHES MINIMUM AND 0.025 INCHES MAXIMUM | | MATERIAL | PLASTIC POLYETHYLENE TEREPHTHALATE AND RUBBER FLUOROSILICONE CLASS FQ | | MEDIA FOR WHICH DESIGNED | AIR | | PRESSURE RATING | 300.0 POUNDS PER SQUARE INCH NOMINAL | | STYLE DESIGNATOR | SPECIAL SHAPED | | TEMP RATING | 65.0 FAHRENHEIT MINIMUM AND 160.0 FAHRENHEIT MAXIMUM |
|
|