|
|
|
National Stock Number:
2915-00-781-8685
Federal Supply Class:
2915
National Item Identification Number:
007818685
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 865791-4 | 99193 | HONEYWELL INTERNATIONAL INC. | | P/N 395548 | 62983 | EATON AEROSPACE, LLC | | P/N 7511197 | 05228 | PTI TECHNOLOGIES INC. | | P/N 8715 | 81873 | WOODWARD HRT INC |
|
Techincal Specification:
| DROP PRESSURE | 0.5 POUNDS PER SQUARE INCH | | DESIGN TYPE | LIMITED | | DIFFERENTIAL PRESSURE | 50.0 POUNDS PER SQUARE INCH | | FILTRATION RATING IN MICRONS | 40.0 NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-25897,TYPE 1 CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE SEAL | | MATERIAL | RUBBER SYNTHETIC SEAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 160.0 FAHRENHEIT MAXIMUM |
|
|