|
|
|
National Stock Number:
2910-01-353-8540
Federal Supply Class:
2910
National Item Identification Number:
013538540
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 2010TM-0R | K8499 | PARKER HANNIFIN UK LIMITED | | 2010TM-OR | Z0EH3 | RAYTHEON AUSTRALIA PTY LTD | | 2010TMOR | 55752 | PARKER-HANNIFIN CORPORATION | | 2010TMOR | Z01D2 | RAYTHEON AUSTRALIA | | EF10036 | F0308 | ZODIAC MILPRO INTERNATIONAL | | P552010 | 18265 | DONALDSON COMPANY, INC. |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | BODY DIAMETER | 3.078 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.656 INCHES NOMINAL | | BODY OVERALL LENGTH | 2.781 INCHES NOMINAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 10.000 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | CELLULOSE FILTERING MEDIUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | T-HANDLEO-RING AND LID SQUARE-CUT GASKET PROVIDED | | TEMP RATING | -55.0 DEG FAHRENHEIT MINIMUM AND 225.0 DEG FAHRENHEIT MAXIMUM |
|
|