| ACTUATION METHOD | DIRECT |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 3.188 INCHES NOMINAL |
| EXTENDED LENGTH | 13.000 INCHES NOMINAL |
| FEATURES PROVIDED | RUBBER BOOT |
| FIRST END HOLE DIAMETER | 0.640 INCHES NOMINAL |
| FIRST END THICKNESS AT MOUNTING HOLES | 0.250 INCHES NOMINAL |
| FIRST END OUTSIDE DIAMETER | 0.947 INCHES NOMINAL |
| FIRST PISTON ROD END STYLE | RING TYPE |
| OVERALL HEIGHT | 5.180 INCHES NOMINAL |
| OVERALL WIDTH | 4.280 INCHES NOMINAL |
| MATERIAL | IRON BODY |
| MOUNTING FACILITY DIAMETER | 0.412 INCHES NOMINAL |
| MOUNTING TYPE AND LOCATION | FLANGE PISTON ROD END |
| MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| PORT LOCATION AND QUANTITY | 1 CENTER SECTION AND 1 CYLINDER HEAD END |
| PORT STYLE | INVERTED FLARE ALL PORTS |
| PORT STYLE | INVERTED FLARE SINGLE PORT |
| PORT THREAD CLASS | 2B ALL PORTS |
| PORT THREAD CLASS | 2B SINGLE PORT |
| PORT THREAD DIAMETER | 0.438 INCHES NOMINAL SINGLE PORT |
| PORT THREAD DIAMETER | 0.500 INCHES NOMINAL ALL PORTS |
| PORT THREAD QUANTITY PER INCH | 20 ALL PORTS |
| PORT THREAD QUANTITY PER INCH | 24 SINGLE PORT |
| PORT THREAD SERIES DESIGNATOR | UNF ALL PORTS |
| PORT THREAD SERIES DESIGNATOR | UNS SINGLE PORT |
| RESERVOIR TYPE | INTEGRAL |
| SEAT ANGLE IN DEG | 42.0 ALL PORTS |
| SEAT ANGLE IN DEG | 42.0 SINGLE PORT |
| SPECIAL FEATURES | DOUBLE RESERVOIR |
| STRAIGHT BORE INSIDE DIAMETER | 0.938 INCHES NOMINAL |