|
|
|
National Stock Number:
2520-01-158-1876
Federal Supply Class:
2520
National Item Identification Number:
011581876
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 4819144 | 0AHU0 | KALMAR AC INC | | 74852006 | 0AHU0 | KALMAR AC INC |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | FIRST END PITCH DIAMETER | 1.562 INCHES NOMINAL | | FIRST END TYPE | SPLINED | | FIRST END SPLINE LENGTH | 2.560 INCHES NOMINAL | | FIRST END SPLINE PRESSURE ANGLE IN DEG | 30.0 | | FIRST END SPLINE QUANTITY | 25 | | FIRST END SPLINE TYPE | INVOLUTE | | III MATERIAL | STEEL,SAE 8625H | | PROPRIETARY CHARACTERISTICS | PACS | | METALLIC HARDNESS RATING | 58.0 MINIMUM ROCKWELL C AND 63.0 MAXIMUM ROCKWELL C | | OVERALL LENGTH | 35.810 INCHES NOMINAL | | SECOND END BEARING SEAT | NOT INCLUDED | | SECOND END GEAR FACE WIDTH | 1.750 INCHES NOMINAL | | SECOND END GEAR OUTSIDE DIAMETER | 2.562 INCHES NOMINAL | | SECOND END GEAR PITCH DIAMETER | 2.167 INCHES NOMINAL | | SECOND END GEAR TEETH DIRECTION | STRAIGHT | | SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 25.0 | | SECOND END GEAR TEETH QUANTITY | 13 | | SECOND END TYPE | BEVELED GEAR | | SPECIAL FEATURES | U/O ALLIS-CHALMERS MODELS AC5 100,120 FORKLIFT TRUCK |
|
|