| AFTER BEARING SLEEVE LENGTH | 11.750 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 24.745 INCHES MINIMUM AND 24.750 INCHES MAXIMUM |
| AFTER END DESIGN | TAPERED |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES |
| DEPTH | 1.843 INCHES MINIMUM AND 1.853 INCHES MAXIMUM |
| FURNISHED ITEMS AND QUANTITY | PROPELLER NUT 1,PROPELLER KEY 2,PIPE PLUG 1,PLUG 1 |
| FORWARD BEARING SLEEVE LENGTH | 0.917 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 24.745 INCHES MINIMUM AND 24.750 INCHES MAXIMUM |
| FORWARD END COUPLING DESIGN | INTEGRAL |
| FORWARD END COUPLING OUTSIDE DIAMETER | 37.245 INCHES MINIMUM AND 37.250 INCHES MAXIMUM |
| FORWARD END COUPLING THICKNESS | 4.615 INCHES MINIMUM AND 4.625 INCHES MAXIMUM |
| OVERALL LENGTH | 37.000 FEET NOMINAL |
| MAJOR DIAMETER | 14.000 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-23284, CLASS 3 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER, SYNTHETIC |
| QUANTITY | 2 |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| TAPER LENGTH | 3.500 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 22.998 INCHES MINIMUM AND 23.000 INCHES MAXIMUM |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| THREAD LENGTH | 12.000 INCHES |
| THREAD QUANTITY | 4 PER INCH |