| AFTER BEARING SLEEVE LENGTH | 1.438 FEET NOMINAL |
| AFTER END DESIGN | TAPERED |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 4.000 INCHES NOMINAL |
| CONSTRUCTION | SOLID |
| COVERING LOCATION | SURFACE BETWEEN BEARING SLEEVE COVERED IN ACCORDANCE W/MIL-R-15058F,TYPE 3 |
| DEPTH | 0.313 INCHES NOMINAL |
| FURNISHED ITEMS AND QUANTITY | PROPELLER KEY,1 |
| FORWARD BEARING SLEEVE LENGTH | 1.042 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 4.000 INCHES NOMINAL |
| FORWARD END DESIGN | TAPERED |
| FORWARD END TAPER LENGTH | 0.375 FEET NOMINAL |
| FORWARD END MAJOR DIAMETER | 2.500 INCHES NOMINAL |
| FORWARD END TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
| FORWARD END TAPER MAJOR DIAMETER | 3.375 INCHES NOMINAL |
| FORWARD END THREAD LENGTH | 2.750 INCHES |
| FORWARD END THREAD QUANTITY | 4 PER INCH |
| KEYWAY DEPTH | 0.375 INCHES NOMINAL |
| KEYWAY QUANTITY | 1 |
| KEYWAY WIDTH | 0.750 INCHES NOMINAL |
| OUTSIDE DIAMETER | 3.375 INCHES NOMINAL |
| OVERALL LENGTH | 10.927 FEET NOMINAL |
| MAJOR DIAMETER | 2.500 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ABS, GRADE 2, FORGE ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER |
| QUANTITY | 1 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY PROTECTIVE COVERING DATA AND SPECIAL FEATURES |
| SPECIAL FEATURES | SHAFT SLEEVES TO CONFORM W/FED SPEC QQ-L-225 COMPOSITION 5,CENTRIFUGAL CAST |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE LOCATION | CENTER |
| WIDTH | 0.750 INCHES NOMINAL |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 0.812 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 3.375 INCHES NOMINAL |
| TAPER | 0.750 PER FOOT IN INCHES NOMINAL |
| THREAD LENGTH | 4.000 INCHES |
| THREAD QUANTITY | 4 PER INCH |