| AFTER BEARING SLEEVE LENGTH | 6.802 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 20.250 INCHES NOMINAL |
| AFTER END DESIGN | TAPERED |
| CONSTRUCTION | HOLLOW |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES COVERED |
| DEPTH | 1.498 INCHES MINIMUM AND 1.505 INCHES MAXIMUM |
| FURNISHED ITEMS AND QUANTITY | COUPLING BOLT,12; COUPLING NUT,12; PROPELLER KEY,2; PROPELLER NUT,1 |
| FORWARD BEARING SLEEVE LENGTH | 4.349 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 20.250 INCHES NOMINAL |
| FORWARD END COUPLING DESIGN | INTEGRAL |
| FORWARD END COUPLING OUTSIDE DIAMETER | 30.625 INCHES NOMINAL |
| FORWARD END COUPLING THICKNESS | 3.750 INCHES NOMINAL |
| INSIDE DIAMETER | 4.875 INCHES MINIMUM AND 11.000 INCHES MAXIMUM |
| MAJOR DIAMETER | 11.250 INCHES NOMINAL |
| OUTSIDE DIAMETER | 18.500 INCHES NOMINAL |
| OVERALL LENGTH | 39.354 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890, CLASS AN MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER |
| QUANTITY | 2 |
| SPECIAL FEATURES | COLD ROLLED IN PROPELLER TAPER AND AFTER SLEEVE AREA |
| WIDTH | 3.500 INCHES MINIMUM AND 3.563 INCHES MAXIMUM |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 3.823 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 18.500 INCHES NOMINAL |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| THREAD LENGTH | 10.250 INCHES |
| THREAD QUANTITY | 4 PER INCH |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE DESIGN | SUITABLE FOR DDG 2 CLASS |
| USAGE LOCATION | PORT/STARBOARD |