| AFTER END DESIGN | TAPERED |
| AFTER BEARING SLEEVE LENGTH | 4.250 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 10.312 INCHES NOMINAL |
| CONSTRUCTION | SOLID |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVE COVERED |
| DEPTH | 0.875 INCHES NOMINAL |
| FURNISHED ITEMS AND QUANTITY | PROPELLER NUT,1; PROPELLER KEY,1 |
| FORWARD END DESIGN | TAPERED |
| FORWARD END TAPER LENGTH | 6.520 FEET NOMINAL |
| FORWARD END TAPER MAJOR DIAMETER | 8.940 INCHES NOMINAL |
| FORWARD END TAPER | 0.125 PER FOOT IN INCHES NOMINAL |
| FORWARD BEARING SLEEVE LENGTH | 4.510 FEET NOMINAL |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 10.312 INCHES NOMINAL |
| KEYWAY QUANTITY | 3 AND 1 |
| KEYWAY WIDTH | 1.125 INCHES MINIMUM AND 1.188 INCHES MAXIMUM |
| KEYWAY DEPTH | 0.500 INCHES NOMINAL |
| MAJOR DIAMETER | 5.250 INCHES NOMINAL |
| OUTSIDE DIAMETER | 9.063 INCHES NOMINAL |
| OVERALL LENGTH | 27.875 FEET NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-890 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROTECTIVE COVERING TYPE | RUBBER |
| QUANTITY | 1 |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL,MATERIAL SPECIFICATION/STANDARD,FORWARD BEARING SLEEVE DATA,AND AFTER BEARING SLEEVE DATA |
| WIDTH | 2.000 INCHES NOMINAL |
| SURFACE FINISH | SMOOTH MACHINED |
| TAPER LENGTH | 19.250 FEET NOMINAL |
| TAPER MAJOR DIAMETER | 9.063 INCHES NOMINAL |
| TAPER | 1.000 PER FOOT IN INCHES NOMINAL |
| THREAD LENGTH | 5.750 INCHES |
| THREAD QUANTITY | 4 PER INCH |
| UNIT TYPE | PROPELLER SHAFT SECTION |
| USAGE LOCATION | PORT/STARBOARD |