|
|
|
National Stock Number:
1680-00-970-9848
Federal Supply Class:
1680
National Item Identification Number:
009709848
Description:
LEVER,REMOTE CONTROL
Detail:
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
|
Manufacturer Information:
| 128CM11002-1 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 128CM11002-1 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| BORE TYPE | SPLINED | | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 2.656 INCHES NOMINAL | | CRITICALITY CODE JUSTIFICATION | BFHA AND FEAT | | DISTANCE BETWEEN FORK INSIDE SPREAD | 0.283 INCHES MINIMUM AND 0.288 INCHES MAXIMUM | | FEATURES PROVIDED | SPLIT END SCREW CLAMPING FEATURE | | LINK END HOLE DIAMETER | 0.2497 INCHES MINIMUM AND 0.2507 INCHES MAXIMUM | | LINK END THICKNESS | 0.562 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000, COMP 4340 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | SHAFT END THICKNESS | 1.000 INCHES NOMINAL | | SHAFT SECURING METHOD | SPLINE | | SPECIAL FEATURES | CRITICAL FEATURE: SECURING HOLE DIA: 0.2500 IN. MIN AND 0.2520 IN. MAX | | SPLINE QUANTITY | 17 | | STYLE DESIGNATOR | CLEVIS LINK END, SECURING HOLE(S) SHAFT END | | SURFACE TREATMENT | CADMIUM |
|
|