5305-00-807-9076 SCREW,ASSEMBLED WASHER Index 5307-00-807-9079 STUD,SHOULDERED

National Stock Number:
1680-00-807-9077

Federal Supply Class:
1680

National Item Identification Number:
008079077

Description:
SHAFT ASSEMBLY,FLEXIBLE

Detail:
An item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.


Manufacturer Information:
0312-12437Y037000KZS2S.S. WHITE TECHNOLOGIES, INC.
0312-12437Y0370097945PENNWALT CORP S S WHITE INDUSTRIAL PRODUCTS DIV
312-12437-Y-3707628HI-FLEX INTERNATIONAL INC
3XLA2605B-3707628HI-FLEX INTERNATIONAL INC
3XLA2605B370KZS2S.S. WHITE TECHNOLOGIES, INC.
3XLA2605B3797945PENNWALT CORP S S WHITE INDUSTRIAL PRODUCTS DIV
669357-117772AERO ENGINEERING & MANUFACTURING COMPANY OF CALIFORNIA, LLC
669357-198897LOCKHEED MARTIN CORP
9260Y370097945PENNWALT CORP S S WHITE INDUSTRIAL PRODUCTS DIV
FAUSG11HZ10KZS2S.S. WHITE TECHNOLOGIES, INC.


Techincal Specification:
END CONNECTION TYPEPLAIN FERRULE BOTH ENDS
CASING LENGTH BETWEEN FERRULES37.000 INCHES NOMINAL
CASING MATERIALPHOSPHOR BRONZE
CASING OUTSIDE DIAMETER0.380 INCHES NOMINAL
CORE DIAMETER0.250 INCHES NOMINAL
CORE MATERIALSTEEL
CORE OVERALL LENGTH37.000 INCHES NOMINAL
CORE ROTATION DIRECTIONCLOCKWISE
CORE REMOVABILITYNONREMOVABLE
END TYPEROUND, INTERNAL SPLINED FIRST END
END OVERALL DIAMETER0.562 INCHES NOMINAL BOTH ENDS
LUBRICATION FITTINGNOT PROVIDED BOTH ENDS
OVERALL LENGTH38.000 INCHES NOMINAL
MINIMUM OPERATING RADIUS4.000 INCHES
PITCH DIAMETER0.250 INCHES NOMINAL FIRST END
WIDTH ACROSS FLATS0.750 INCHES NOMINAL BOTH ENDS
WRENCHING FACILITY TYPEHEXAGON BOTH ENDS
SPLINE MAJOR DIAMETER0.406 INCHES NOMINAL FIRST END
SPLINE MINOR DIAMETER0.400 INCHES NOMINAL FIRST END
SPLINE PRESSURE ANGLE IN DEG14.5 FIRST END
SPLINE QUANTITY12 FIRST END
SPLINE TYPEINVOLUTE FIRST END
SPLINE LENGTH0.500 INCHES NOMINAL FIRST END
TIP LENGTH0.375 INCHES NOMINAL SECOND END
TIP LENGTH0.500 INCHES NOMINAL FIRST END
TORSIONAL DEFLECTION RATING1.3 DEG PER FOOT PER INCH POUND LOAD


Click here to Register for Free 30-day Trial