|
|
|
National Stock Number:
1650-01-346-3205
Federal Supply Class:
1650
National Item Identification Number:
013463205
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 03205 | 59211 | PARKER-HANNIFIN CORPORATION | | 03205 | 62628 | PARKER-HANNIFIN CORPORATION | | 3PU10-025 | 62628 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| DROP PRESSURE | 2.5 POUNDS PER SQUARE INCH | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 11.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SURFACE AREA | 0.690 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 3.0 ABSOLUTE AND 0.5 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | METAL BODYCELLULOSE AND RESIN SYNTHETIC FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | AIR AND GAS | | SPECIAL FEATURES | MESH COVERED OUTER SURFACE; METAL END CAPS | | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | TEMP RATING | 225.0 FAHRENHEIT MAXIMUM |
|
|