|
|
|
National Stock Number:
1650-01-206-1955
Federal Supply Class:
1650
National Item Identification Number:
012061955
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 757545-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION | | AN6235-1A | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| DROP PRESSURE | 0.010 POUNDS PER SQUARE INCH | | BODY DIAMETER | 0.797 INCHES MINIMUM AND 0.859 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.375 INCHES MINIMUM AND 0.406 INCHES MAXIMUM | | BODY OVERALL LENGTH | 1.875 INCHES MINIMUM AND 1.938 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL CORROSION RESISTING BODY | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | CYLINDRICAL W/CLOSED ENDS | | TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 380.0 FAHRENHEIT MAXIMUM |
|
|