| DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| CONNECTION DESIGN | THREADED |
| CONNECTION TYPE | DRAIN AND INLET AND OUTLET |
| CONNECTION GOVERNMENT SPEC/STD | MS33649-3 AND MS33649-5 AND MS33649-5 |
| CONNECTION QUANTITY | 3 |
| DISPLACEMENT TYPE | CONSTANT |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3750.0 |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| MOUNTING BOLT HOLE SPACING | 0.935 IN. BY 0.935 IN. |
| MOUNTING HOLE DIAMETER | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FACE |
| PITCH DIAMETER | 0.375 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SPLINE PITCH | 32/64 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 12 |
| SPLINE LENGTH | 0.650 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| SPLINE MAJOR DIAMETER | 0.406 INCHES MINIMUM AND 0.409 INCHES MAXIMUM |
| SPLINE MINOR DIAMETER | 0.347 INCHES MINIMUM AND 0.350 INCHES MAXIMUM |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.375-24 AND 0.500-20 |
| TORQUE LOAD RATING | 34.0 INCH-POUNDS |