|
|
|
National Stock Number:
1650-01-006-1752
Federal Supply Class:
1650
National Item Identification Number:
010061752
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 50793 | K0377 | GOODRICH ACTUATION SYSTEMS LIMITED | | 50793 | K0659 | CLAVERHAM LTD | | AC7031F697Y6 | 18350 | PALL AEROPOWER CORPORATION | | M8815-18-1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DROP PRESSURE | 12.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 1.140 INCHES NOMINAL | | BODY OVERALL LENGTH | 3.625 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | DIFFERENTIAL PRESSURE | 4500.0 POUNDS PER SQUARE INCH | | FLOW DIRECTION | PARALLEL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
|
|