| DRIVE SHAFT GOVERNMENT STANDARD | AND10261 |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | AND10050-12 |
| CONNECTION QUANTITY | 4 |
| CONNECTION TYPE | DRAIN |
| CONNECTION TYPE | INLET |
| CONNECTION TYPE | OUTLET |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.950 CUBIC INCHES |
| DISPLACEMENT TYPE | CONSTANT |
| FSC APPLICATION DATA | AIRCRAFT HYDRAULIC SYSTEM |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT MINUS 65 DEG F TO PLUS 275 DEG F |
| MOUNTING BOLT CIRCLE DIAMETER | 5.000 INCHES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.343 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 4230.0 |
| PITCH DIAMETER | 0.6000 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNF AND UN |
| SHAFT PROTRUSION LENGTH | 1.125 INCHES NOMINAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| SPLINE MINOR DIAMETER | 0.5360 INCHES NOMINAL |
| SPLINE PITCH | 20/40 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 12 |
| SPLINE LENGTH | 0.813 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.6360 INCHES NOMINAL |
| SURFACE TREATMENT | ANODIZE HOUSING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.562-18 AND 1.062-12 |
| TORQUE LOAD RATING | 453.6 INCH-POUNDS |