| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| CONNECTION DESIGN | THREADED |
| CONNECTION QUANTITY | 4 |
| CONNECTION TYPE | DRAIN AND INLET AND OUTLET |
| DISPLACEMENT TYPE | CONSTANT |
| MATERIAL | STEEL CORROSION RESISTING HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI AT MINUS 65 DEG TO PLUS 275 DEG F |
| MOUNTING BOLT HOLE SPACING | 1.876 IN. BY 1.876 IN. |
| MOUNTING GOVERNMENT STANDARD | AND 10260 |
| MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 10000.0 |
| PITCH DIAMETER | 0.458 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| SHAFT PROTRUSION LENGTH | 0.656 INCHES MINIMUM AND 0.666 INCHES MAXIMUM |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| SPLINE LENGTH | 0.500 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.517 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.433 INCHES NOMINAL |
| SPLINE PITCH | 24/48 |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE QUANTITY | 11 |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL |
| THREAD SIZE | 0.438-20 AND 0.500-20 |