| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.078 INCHES MINIMUM AND 2.088 INCHES MAXIMUM FIRST HOLE |
| FASTENER LENGTH | 2.193 INCHES MINIMUM AND 2.213 INCHES MAXIMUM |
| GRIP DIAMETER | 0.671 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| GRIP LENGTH | 1.750 INCHES NOMINAL |
| HEAD HEIGHT | 0.257 INCHES NOMINAL |
| HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| HEAD MINOR DIAMETER | 0.711 INCHES MINIMUM AND 0.717 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-CLOSE TOLERANCE,SPLINE DRIVE,CRES (125 KSI KSU) DRILLED, SHORT THREAD |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP XM-13 OVERALL |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.4375 INCHES |
| SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.453 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNJF |