|
|
|
|
 | 3110-00-542-0021 | BEARING,BALL,ANNULAR | 01/01/1963 |
|
 | 3110-00-542-0021 | BEARING,BALL,ANNULAR |  = Manual available. | 0 |
|
 | 210 | CONNECTOR | | 1 | | BACB10AZ50 | |  21335 | 2 | | 210 | RECEIVER AS | B0897 | 2 | | 2-1.0 | CURRENT TRANSFORMER | NAPTECH TEST EQUIPMENT, INC. | 0 | | 6210 | MAGNETO | KASTLE AVIATION, INC. | 1 | | 210K | BEARING BALL | KASTLE AVIATION, INC. | 3 | | 1210 | GROMMET (NONMETALIC) | KASTLE AVIATION, INC. | 65 | | 210 | CAPLUG | AVITAN CORP. | 109 | | 1210 | BUSHING | AVITAN CORP. | 30 | | 37127 | SEALANT | GALI CORPORATION | 4 | | FF-B171/4 | BEARING | GALI CORPORATION | 101 | | 210 | LUBRICANT | GALI CORPORATION | 18 | | 509113 | SEAL | GALI CORPORATION | 4 | | 1210 | ADHESIVE | GALI CORPORATION | 7 | | T77 | REDUCER | GALI CORPORATION | 127 | | 6210 | BEARING, BALL, ANNULAR | C & D EQUIPMENT COMPANY, INC. | 1 | | 6210 | BEARING | ILN TECHNOLOGIES, INC. | 1 | | 210 | NAMEPLATE | WESTERN AIRPARTS CORPORATION | 25 | | 210 | VALVE | WESTERN AIRPARTS CORPORATION | 30 | | 6210 | Bearing | BAKER BEARING CO. | 3 |
For additional information Register for Free Trial
|
 For additional information Register for Free Trial
|
 | 210TF | FAG BEARINGS CORPORATION | 43991 | | 213-0913 | HARSCO CORP BMY-COMBAT SYSTEMS DIV | 93568 | | 225825 | CLARK EQUIPMENT CO | 12603 | | 232816 | BENDIX COMMERCIAL VEHICLE SYSTEMS LLC | 06853 | | 3A7729 | LINK-BELT CRANES, L.P., LLLP | 2Y614 | | 30E04 | BARBER-GREENE CO | 05643 | | 302-1025P19 | RAYTHEON COMPANY | 49956 | | 3178-018 | WYSONG AND MILES COMPANY | 66764 | | 318634 ITEM 86 | BRADLEY ENGINEERING CO INC | 52626 | | 3210XR1U9 | GENERAL MOTORS CORP | 24617 |
For additional information Register for Free Trial
 | Bin Support Channel | P/N's AM2000-205, 206, -207, -210, -211, -212 & -296 | Boeing (747-300) | 01/25/2007 | 1 | PQ0071NM | | Seat, Ball | P00449 | Airbus (A320 Models -211, -231) | 05/27/2008 | 115 | PQ2685CE | | Stack Assembly L.H. Outboard | K5155156-204 | Cessna (421, 421A, 421B) | 01/08/2001 | 6 | PQ1260NM | | Stack Assembly R.H. Inboard | K5155156-213 | Cessna (421, 421A, 421B) | 01/08/2001 | 6 | PQ1260NM | | Bin Support Channel | AM2000-205, 206, -207, -210, -211, -212 & -296 | Boeing (747-300) | 02/07/1999 | 1 reissued | | | Bin Support Channel | AM2000-205, 206, -207, -210, -211, -212 & -296 | Boeing (747-300) | 07/02/1999 | 1 reissued | | | Stack Assembly R.H. Inboard | K5155156-213 | Cessna (421, 421A, 421B) | 08/01/2001 | 6 | PQ1260NM | | Stack Assembly L.H. Outboard | K5155156-204 | Cessna (421, 421A, 421B) | 08/01/2001 | 6 | PQ1260NM | | Cabin Window Assembly | N14QU4Q06-210 | Boeing (747 Series 100, 200, 300, 400, SP) | 03/19/2001 | 70 | PQ0327SW | | Bearing | 90166 | Boeing (Boeing Model(s) Per Eligibility Chart Dtd 5/3/96) | 08/11/1996 | 5 | |
For additional information Register for Free Trial
|
 | OVERALL WIDTH | 20.0 MILLIMETERS NOMINAL | | BORE DIAMETER | 50.00 MILLIMETERS NOMINAL | | OVERALL OUTSIDE DIAMETER | 90.00 MILLIMETERS NOMINAL | | RETAINER FABRICATION METHOD | PRESSED | | LOAD DIRECTION | RADIAL | | BORE SHAPE | STRAIGHT | | INTERNAL FIT-UP DESIGNATION | STANDARD | | STANDARD TOLERANCE DESIGNATION | ABEC NO.1 | | MATERIAL | STEEL OVERALL | | STYLE DESIGNATOR | NON-LOADING GROOVE, NON-SEPARABLE |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Army | DA | Army | | Air Force | DF | Air Force | | U.S. Marine Corps. | DM | U.S. Marine Corps. | | Navy | DN | Navy | | Defense Logistics Agency. | DS | Defense Logistics Agency. | | U.S. Coast Guard. | GP | U.S. Coast Guard. |
| | PRICE | | All Departments | Price | 39.80 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | U | Precious Metal type is unknown. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | N | Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials. |
| | DEMILITARIZATION CODE. | | All Departments | A | No-USML/Non-CCLI – No DEMIL or DoD TSC required. Department of Commerce may impose licensing requirements to certain destinations. (Note 9). |
|
For additional information Register for Free Trial |
|  | | | BEARING,BALL,ANNULAR IDENTIFY TO: MIL-STD-130N DATED 17 DEC 2007. IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY/FEDERAL SPECIFICATIONS/STANDARDS AND/OR VOLUNTARY INDUSTRY) STANDARDS. REFER TO SECTION L, CLAUSE 52.211-9G13 FOR OBTAINING SUCH DATA. FOREIGN BEARINGS: AN AWARD FROM THIS SOLICITATION CAN ONLY BE MADE FOR A BEARING MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA AND FOR EACH BALL OR ROLLER BEARING, THE COST OF THE BEARING COMPONENTS (BEARING ELEMENT, RETAINER, INNER RACE, OR OUTER RACE) MINED, PRODUCED OR MANUFACTURED IN THE UNITED STATES, ITS OUTLYING AREAS, OR CANADA MUST EXCEED 50% OF THE TOTAL COST OF THE BEARING COMPONENTS OF THAT BALL OR ROLLER BEARING. SEE DFARS CLAUSE 252.225-7016, RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS (DEC 2010). A CONTRACTOR'S DECLARATION ON THE DOMESTIC/FOREIGN NATURE OF MATERIAL BEING OFFERED IS REQUIRED. PLEASE VISIT THE FOREIGN BEARING WEBSITE AT http://www.aviatio n.dla.mil/UserWeb/ForeignBearingWaiver/index.htm TO OBTAIN A COPY OF THE CONTRACTOR'S DECLARATION FORM. PLEASE PRINT, COMPLETE, SIGN AND HAVE READY FOR SUBMISSION UPON REQUEST FROM THE BUYER. FAILURE TO PROVIDE THIS INFORMATION MAY RESULT IN YOUR QUOTE NOT BEING CONSIDERD FOR AWARD. IN THE EVENT NO OFFERED BEARINGS MEET THIS SOURCING REQUIREMENT, THIS SOLICITATION MAY BE CANCELLED AND A WAIVER MAY BE REQUESTED BY THE PROCUREMENT ACTIVITY. UPON RECEIPT OF AN APPROVED WAIVER FROM THE DOMESTIC SOURCING RESTRICTION, THE REQUIREMENT MAY BE RE-SOLICITED. SEE DFARS 225.7009-4, WAIVER, RESTRICTION ON BALL AND ROLLER BEARINGS (DEC 2010). SAMPLING: 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO,OR COME IN DIRECT CONTACT WITH,ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). . SKF STEEL SPECIFICATION: 471563C AND 472921 GRADE 24 MAY BE USED INSTEAD 0F ASTM A295 GRADE 52100 BEARING STEEL | Cage# 79343 and PartNumber# 00213-0913
Cage# 3D6E9 and PartNumber# 1228J192
Cage# 83299 and PartNumber# 0151197-00
Cage# 21760 and PartNumber# 1210
Cage# 83299 and PartNumber# 151197
Cage# 38443 and PartNumber# 201S0106A306A18S0000
Cage# 11083 and PartNumber# 1T0043
Cage# 43991 and PartNumber# 210TF
Cage# 43991 and PartNumber# 210F4
Cage# 38443 and PartNumber# 210SB1STA006A14S00000
Cage# 21335 and PartNumber# 210K
Cage# 12603 and PartNumber# 225825
Cage# 06853 and PartNumber# 232816
Cage# 63479 and PartNumber# 15566E3-18-1
Cage# 18990 and PartNumber# BG26122
Cage# 24617 and PartNumber# 3210X1
Cage# 24617 and PartNumber# 3210XR1U9
Cage# 43334 and PartNumber# 3210XR1U9
Cage# 43334 and PartNumber# 3210X1
Cage# 66764 and PartNumber# 3178-018
Cage# 23926 and PartNumber# 37127
Cage# 89926 and PartNumber# 4250327
Cage# 89926 and PartNumber# 4250327-0
Cage# 78640 and PartNumber# 509113
Cage# 52676 and PartNumber# 6210JDC
Cage# 52676 and PartNumber# 6210J
Cage# 29337 and PartNumber# 6210
Cage# 02989 and PartNumber# 50BC02
Cage# 70413 and PartNumber# 50BC02
Cage# 43991 and PartNumber# 210
Cage# 01212 and PartNumber# 210
Cage# 23926 and PartNumber# D37127
Cage# 97942 and PartNumber# 336D999H09
Cage# 79218 and PartNumber# W16210 |
|
| | | FF-B-171/4 NOT 1 | AST | BASIC | | 10/03/2006 | 10/03/2006 | | | FF-B-171B(1) SUP 1 NOT 1 | AST | BASIC | | 10/03/2006 | 10/03/2006 | |
|
|
|
|
|
|
|
|