|
|
|
|
 | 1560-01-579-8180 | RIB,STIFFENER,AIRCRAFT | 11/24/2009 |
|
 | 1560-01-579-8180 | RIB,STIFFENER,AIRCRAFT | | 0 |
|
|
|
 For additional information Register for Free Trial
|
 | 5-96183-155 | AIR FORCE UNITED STATES DEPARTMENT OF THE DBA TINK | 98748 | | 5-96183-155 | THE BOEING COMPANY | 81205 |
For additional information Register for Free Trial
|
 | AIRCRAFT LOCATION | MAIN GEAR DOOR | | AIRCRAFT MISSION DESIGN SERIES | KC-135 | | SPECIAL FEATURES | FINISH PER F-2.115 | | III MATERIAL | ALUMINUM ALLOY 2024 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5 T4 FED SPEC SINGLE MATERIAL RESPONSE | | PROPRIETARY CHARACTERISTICS | PACS |
For additional information Register for Free Trial
|
 | ACQUISITION METHOD CODE. | | 'All Departments | 1 | SUITABLE FOR COMPETITIVE ACQUISITION. |
| | ACQUISITION METHOD SUFFIX CODE. | | 'All Departments | G | THE GOVERNMENT HAS UNLIMITED RIGHTS TO THE TECHNICAL DATA AND THE DATA PACKAGE IS COMPLETE. VALID AMCS: 1 AND 2. |
| | MAJOR ORGANIZATIONAL ENTITY. | | Air Force | DF | Air Force | | Defense Logistics Agency. | DS | Defense Logistics Agency. |
| | PRICE | | All Departments | Price | 315.96 |
| | PRECIOUS METALS INDICATOR CODES. | | All Departments | A | Item does not contain Precious Metal. |
| | CRITICALITY CODE. | | All Departments | X | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| | AUTOMATIC DATA PROCESSING EQUIPMENT. | | All Departments | 0 | Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9). |
| | ELECTROSTATIC DISCHARGE CODE. | | | HAZARDOUS MATERIALS INDICATOR CODE. | | All Departments | P | Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product. |
| | DEMILITARIZATION CODE. | | All Departments | Q | Commerce Control List Items (CCLI) – Mutilation to the point of scrap required outside the United States. In the United States, mutilation requirement determined by the DEMIL Integrity Code. DoD Trade Security Controls (TSC) required in the United States. (Note 8). |
|
For additional information Register for Free Trial |
|  | | | RIB,STIFFENER,AIRCR RIGHTS GUARD APPLIES EXCEPTIONS: 1. Part marking per MIL-STD-130 method per drawing requirements and BAC 5307. Marking must include national stock number, part number, current design authority code (98748), actual manufacturer's CAGE code (-----), date of manufacture and "For Military Use Only". Parts will not be marked with the original design authority (Boeing) CAGE code. 2. Delete reference to BAC 5005 and D2-5000. 3. Surface texture per ASME B46.1. 4. Dimensions and tolerances per ASME Y14.5M. 5. Use SAE AMS QQ-A-250-5 in lieu of QQ-A-250/5. 6. Finish Code F-2.115 reads: Chemical treat to meet the requirements of MIL-DTL-5541, Type 1A or anodize to meet the requirements of MIL-A-8625, Type I or Type IC (preferred), Class 1. Apply MIL-PRF-23377, Type I Class C2 to a dry film thickness in accordance with manufacturer's application instructions and MIL-F-18264. 7. Do not drill fastener, rivet, or pilot holes. 8. IUID marking is not required. ...END OF EXCEPTIONS... DIGITAL MYLAR DATA EXISTS FOR THIS NSN, AND WILL BE INCLUDED IN THE TECHNICAL DATA PACKAGE PROVIDED BY DLA. IF UNABLE TO USE THE DATA IN THE DIGITAL FORMAT PROVIDED, THE CONTRACTOR WILL BE RESPONSIBLE FOR HAVING THE DATA CONVERTED TO THE NECESSARY FORMAT (I.E. MYLAR FILM), THROUGH A THIRD PARTY AND BEAR THE ASSOCIATED COSTS WHEN CONVERTING FROM DIGITAL TO STABLE BASED FORMAT, THE DIGITAL MYLAR SHALL BE PLOTTED ON STABLE BASE MATERIAL, WHILE MAINTAINING THE DIMENSIONAL ACCURACY DEMANDS OF THE UNDIMENSIONED DRAWING. THIS INCLUDES BUT IS NOT LIMITED TO: VERIFY THE PLOT OF THE MYLAR(S) FOR DIMENSIONAL ACCURACY AS OUTLINED IN ASME Y14.31. ACCURACY SHALL BE DETERMINED VERTICALLY, HORIZONTALLY AND DIAGONALLY. ENSURE THAT THE INDIVIDUAL GRID UNITS ARE WITHIN THE TOLERANCE OF (+,-) 0.005 INCHES AND (+,-) 0.007 INCHES DIAGONALLY. TOTAL GRID TOLERANCE SHALL BE (+,-) 0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY. DRAWINGS WITH DIMENSIONAL ACCURACY POINTS SUCH AS TRAMMEL POINTS SHALL BE MEASURED TO WITHIN CENTERLINE (+,-) 0.010 INCHES AND (+,-) 0.014 INCHES DIAGONALLY. REGISTRATION MARKS SUCH AS THOSE USED ON CIRCUIT CARDS SHALL BE MEASURED TO WITHIN (+,-) 0.005 INCHES AND (+ ,-) 0.007 INCHES DIAGONALLY. MARK IAW MIL-STD-130N, DATED 17 DEC 2007. CONFIGURATION CONTROL APPLIES SEE CLAUSE 52.246-9G36 (SECTION I). 1. SAMPLING FOR INSPECTION AND TESTING SHALL BE IAW ANSI/ASQ Z1.4-2008, DATED JAN 1, 2008. ANY ALTERNATE PLAN MUST BE APPROVED BY THE PCO. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS REQUIRED 2. ANY DEFECTIVE ITEM DISCOVERED DURING INSPECTION MAY BE CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY. THIS ITEM HAS TECHNICAL DATA SOME OR ALL OF WHICH IS SUBJECT TO EXPORT-CONTROL REGULATIONS. DISTRIBUTION OF THE TECHNICAL DATA AND ELIGIBILITY FOR AWARD ARE LIMITED TO THOSE SUPPLIERS QUALIFIED THROUGH JCP CERTIFICATION, OR TO THOSE LICENSED BY EITHER THE DEPARTMENTS OF STATE OR COMMERCE; OR TO FOREIGN SUPPLIERS PURSUANT TO INTERNATIONAL AGREEMENTS. TO APPLY FOR JCP CERTIFICATION, COMPLETE DD FORM 2345, "MILITARY CRITICAL TECHNICAL DATA AGREEMENT," FORM IS AVAILABLE AT THE WORLD WIDE WEB ADDRESS HTTP://WWW.DLIS.DLA.MIL/JCP OR BY WRITING TO: DLA LOGISTICS INFORMATION SERVICE FEDERAL CENTER 74 WASHINGTON AVE., NORTH BATILE CREEK, MI 49017-3084 TO MANUFACTURE THIS ITEM, NON-JCP CERTIFIED SUPPLIERS MUST SUBMIT A CURRENT MANUFACTURING LICENSE AGREEMENT, TECHNICAL ASSISTANCE AGREEMENT, DISTRIBUTION AGREEMENT OR OFF-SHORE PROCUREMENT AGREEMENT APPROVED BY THE DIRECTORATE OF DEFENSE TRADE CONTROLS WITH THE OFFER, UNLESS AN EXEMPTION UNDER THE PROVISIONS OF ITAR SECTION, 125.4 "EXEMPTIONS OF GENERAL APPLICABILITY," AND/OR EAR PART 740 ARE APPLICABLE. NON-JCP CERTIFIED SUPPLIERS SEEKING EXPORT CONTROLLED TECHNICAL DATA ARE REQUIRED TO PROVIDE THE CONTRACTING OFFICER WITH AN APPLICABLE AGREEMENT OR IDENTIFY WHICH ITAR/EAR EXEMPTION APPLIES TO RECEIVE A COPY OF THE EXPORT CONTROLLED TECHNICAL DATA. NOTE: JCP CERTIFIED CONTRACTORS WHO RECEIVE TECHNICAL DATA PURSUANT TO THEIR DD FORM 2345 CERTIFICATION MAY NOT FURTHER DISSEMINATE SUCH DATA UNLESS FURTHER DISSEMINATION OF THE TECHNICAL DATA IS EXPRESSLY PERMITTED BY DODD 5230.25." | | Cage# 81205 and PartNumber# 5-96183-155 |
|
| | | BAC5307 | DWG | BASIC | SS | 11/27/2013 | 01/13/2014 |  81205 | | BAC5300-2 | DWG | BASIC | SS | 10/09/2013 | 01/13/2014 | 81205 | | BAC5300-2 | DWG | BASIC | CB | 09/01/2006 | 01/13/2014 | 81205 | | BAC5300-1 | DWG | BASIC | CB | 09/01/2006 | 11/14/2013 | 81205 | | BAC5300 | DWG | BASIC | SS | 09/11/2011 | 06/20/2013 | 81205 | | BAC5300-1 | DWG | BASIC | SS | 04/09/2013 | 04/17/2013 | 81205 | | BAC5300 | DWG | BASIC | CB | 10/31/1999 | 04/10/2013 | 81205 | | BACD2000 | DWG | BASIC | ST | 08/31/2007 | 03/08/2010 | 81205 | | 5-96183/2 | MYL | BASIC | DM | 07/24/1979 | 02/26/2010 | 81205 | | BAC5300-2 | DWG | BASIC | CB | 09/01/2006 | 08/22/2008 | 81205 |
|
|
|
|
|
|
|
|