|
|
|
National Stock Number:
9540-01-356-2123
Federal Supply Class:
9540
National Item Identification Number:
013562123
Description:
BEAM,STRUCTURAL
Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.
|
Manufacturer Information:
| 60-19077 | 29321 | TRANSTAR METALS CORP |
|
Techincal Specification:
| BASIC SHAPE STYLE | T SHAPE | | FABRICATION METHOD | EXTRUDED | | FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM | | HEAT TREATMENT | T-6511 SOLUTION HEAT TREATED | | LEFT SIDE TOP FLANGE THICKNESS | 0.180 INCHES MINIMUM AND 0.194 INCHES MAXIMUM | | LEG THICKNESS | 0.024 INCHES MINIMUM AND 0.036 INCHES MAXIMUM | | LENGTH | 2.506 FEET MINIMUM AND 2.554 FEET MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/11 FED SPEC 1ST MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | RIGHT SIDE TOP FLANGE THICKNESS | 0.180 INCHES MINIMUM AND 0.194 INCHES MAXIMUM |
|
|