|
|
|
National Stock Number:
6680-00-526-8140
Federal Supply Class:
6680
National Item Identification Number:
005268140
Description:
GENERATOR,TACHOMETER
Detail:
A GENERATOR CONSISTING OF A SERIES OF MOUNTED COILS SURROUNDING A ROTATING PERMANENT MAGNET OR A PERMANENT MAGNET AND A ROTATING ARMATURE. THE VOLTAGE OUTPUT IS DIRECTLY PROPORTIONAL TO THE SPEED OF ROTATION OF THE SHAFT. WHEN USED WITH AN ASSOCIATED INDICATOR, TRANSMITS SUCH DATA AS REVOLUTIONS PER MINUTE, SPEED OF TRAVEL, AND THE LIKE. MAY ALSO BE USED IN SERVOMECHANISM LOOPS AS A SYSTEM STABILIZER. EXCLUDES ROTARY INVERTERS, ROTARY CONVERTERS, MOTOR GENERATORS, DYNAMOTORS, GENERATOR SETS, SYNCHROS, FREQUENCY OR PHASE CHANGERS, AND ENGINE ACCESSORY GENERATORS.
|
Manufacturer Information:
| 21135TYPEA1 | 80049 | DEPARTMENT OF THE AIR FORCE | | 2CM5AEN | 24446 | GENERAL ELECTRIC COMPANY | | 2CM5AEN36 | 24446 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 39.0 OHMS AND 49.0 OHMS | | ACCURACY RANGE IN PERCENT | -0.5 TO 0.5 | | CALIBRATION SPEED IN RPM | 3600.0 | | CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS | 23.0 AC | | LENGTH OF SHAFT FROM HOUSING | 0.469 INCHES SINGLE END | | OVERALL HEIGHT | 3.172 INCHES | | OVERALL LENGTH | 5.594 INCHES | | OVERALL WIDTH | 2.813 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | MOUNTING METHOD | PAD | | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.875 INCHES | | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.875 INCHES | | SPECIAL FEATURES | 2 ROTOR POLES | | ROTOR SPEED RATING IN RPM | 200.0 LOW FULL LOAD AND 4400.0 HIGH FULL LOAD | | SHAFT END CHARACTERISTIC | A15 SINGLE STYLE SINGLE END | | WIDTH ACROSS FLATS | 0.2450 INCHES NOMINAL SINGLE END | | TERMINAL TYPE AND QUANTITY | 1 RECEPTACLE |
|
|