| DISTANCE FROM CENTERLINE TO CONNECTOR END | 2.852 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE TO CABLE END | 1.172 INCHES MAXIMUM |
| BODY ANGLE IN DEG | 135.0 |
| BODY STYLE | ANGLE SHAPE W/CABLE CLAMP |
| CABLE ENTRANCE DIAMETER | 0.581 INCHES MINIMUM AND 0.831 INCHES MAXIMUM |
| CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 900.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 41.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 1250.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 20-4 SINGLE MATING END |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,GRADE C,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND SHOCK RESISTANT AND COLD RESISTANT AND HEAT RESISTANT AND EXPLOSION PROOF |
| INCLUDED CONTACT QUANTITY | 4 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL | RUBBER SILICONE CLASS Q SINGLE MATING END |
| INSERT POSITION IN DEG | 0.0 |
| OVERALL DIAMETER | 1.469 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD LENGTH | 0.664 INCHES |
| NOMINAL THREAD SIZE | 1.250 INCHES |
| POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.020 GOLD GRAINS, TROY |
| SHELL MATERIAL | ALUMINUM |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE AND NICKEL |
| SHELL TYPE | SOLID |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| THREAD CLASS | 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNEF |
| THREAD QUANTITY PER INCH | 18 |
| THREADED DEVICE TYPE | COUPLING FACILITY |