5935-01-340-8618, ADAPTER,CONNECTOR

5935-01-340-8619 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-340-8618

Federal Supply Class:
5935

National Item Identification Number:
013408618

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.

Manufacturer Information:

MIL-C-26482	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-26482	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS3119E8-2PX	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.562 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
BODY STYLE	STRAIGHT SHAPE W/FLANGE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.594 INCHES NOMINAL
CONNECTOR LOCKING METHOD	BAYONET PIN
CONTACT MATERIAL	COPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS	600.0 ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT REMOVABILITY	NONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	8-2 ALL MATING ENDS
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204,TY 2,GRADE C,CL 1 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290,CL 2 FED SPEC 2ND TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD AND NICKEL ALL MATING ENDS SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.594 INCHES NOMINAL
ENVIRONMENTAL PROTECTION	MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND THERMAL SHOCK RESISTANT AND CORROSION RESISTANT
INCLUDED CONTACT QUANTITY	2 1ST MATING END SINGLE CONTACT GROUPING2 2ND MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND PIN 1ST MATING END SINGLE CONTACT GROUPINGROUND SOCKET 2ND MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL	PLASTIC ALL MATING ENDS
INSERT POSITION IN DEG	122.0 AND 238.0
OPERATING TEMP RATING	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM
OVERALL HEIGHT	0.828 INCHES MAXIMUM
OVERALL LENGTH	1.125 INCHES MAXIMUM
OVERALL WIDTH	0.828 INCHES MAXIMUM
MATING END QUANTITY	2
POLARIZATION METHOD	KEY, MULTIPLE KEY GROOVE
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PRECIOUS MATERIAL	GOLD
PRECIOUS MATERIAL AND WEIGHT	0.020 GOLD GRAINS, TROY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE
SHELL MATERIAL	ALUMINUM ALLOY
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES
SHELL SURFACE TREATMENT	CADMIUM AND CHROMATE
SHELL TYPE	SOLID
UNTHREADED MOUNTING HOLE DIAMETER	0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA	96906-MS3119 GOVERNMENT STANDARD
TEST DATA DOCUMENT	81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial