| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 5.850 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | FRICTION |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,ALLOY 260 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END 1ST CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END 1ST CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 3.0 SINGLE MATING END 1ST CONTACT GROUPING |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END 1ST CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 3 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TY 2,GRADE C,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END 1ST CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END 1ST CONTACT GROUPING |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| INSERT MATERIAL | PLASTIC POLYPHENYLENE SINGLE MATING END |
| MATING END QUANTITY | 1 |
| III BODY STYLE | RIGHT ANGLE TYPE |
| INCLUDED CONTACT QUANTITY | 297 SINGLE MATING END 1ST CONTACT GROUPING |
| INCLUDED CONTACT TYPE | FLAT PIN SINGLE MATING END 1ST CONTACT GROUPING |
| POLARIZATION METHOD | MATING END |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.297 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| PROPRIETARY CHARACTERISTICS | PACS |
| OPERATING TEMP RATING | -55.0 DEG CELSIUS MINIMUM AND 105.0 DEG CELSIUS MAXIMUM |
| OVERALL HEIGHT | 0.579 INCHES NOMINAL |
| OVERALL LENGTH | 6.150 INCHES NOMINAL |
| OVERALL WIDTH | 1.144 INCHES NOMINAL |
| SHELL MATERIAL | ALUMINUM ALLOY 6061 |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8,TEMPER T6510 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL SURFACE TREATMENT | CHROMATE |
| SHELL TYPE | SOLID |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CL 1A MIL SPEC SINGLE TREATMENT RESPONSE |
| SPECIAL FEATURES | TWO ADDITIONAL MOUNTING HOLES 0.141 IN. MIN DIA,0.142 IN. MAX DIA; GROUND BUSHING PIN LOCATION 208 |
| TERMINAL LOCATION | SIDE SINGLE MATING END 1ST CONTACT GROUPING |
| TERMINAL TYPE | PIN SINGLE MATING END 1ST CONTACT GROUPING |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |