| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.708 INCHES MINIMUM AND 0.728 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.812 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED COUPLING RING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 22-12 SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | RHODIUM SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.812 INCHES NOMINAL |
| INCLUDED CONTACT QUANTITY | 12 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT POSITION IN DEG | 0.0 |
| OVERALL HEIGHT | 1.031 INCHES NOMINAL |
| OVERALL LENGTH | 1.125 INCHES MINIMUM AND 1.421 INCHES MAXIMUM |
| OVERALL WIDTH | 1.031 INCHES NOMINAL |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD LENGTH | 0.250 INCHES |
| NOMINAL THREAD SIZE | 0.875 INCHES AND 0.750 INCHES |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES RHODIUM |
| PRECIOUS MATERIAL | RHODIUM |
| PRECIOUS MATERIAL AND WEIGHT | 0.012 RHODIUM GRAINS, TROY |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-325,GRADE T6 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | ANODIZE |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 81349-83723/83 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-83723 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNEF |
| THREADED DEVICE TYPE | COUPLING FACILITY AND BACK SHELL |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.116 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |