|
|
|
National Stock Number:
5905-01-348-7081
Federal Supply Class:
5905
National Item Identification Number:
013487081
Description:
RESISTOR,FIXED,FILM
Detail:
A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also ATTENUATOR, FIXED and RESISTOR, FIXED, COMPOSITION. Excludes carbon composition type resistors.
|
Manufacturer Information:
| MIL-PRF-55182/6 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-R-55182/6 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | RNR70C2224BS | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 2.200 MEGOHMS | | AMBIENT TEMP AT FULL RATED POWER | 125.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 175.0 | | BODY DIAMETER | 0.160 INCHES MINIMUM AND 0.328 INCHES MAXIMUM | | BODY LENGTH | 0.500 INCHES MINIMUM AND 0.875 INCHES MAXIMUM | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.500 FREE AIR | | RESISTANCE TOLERANCE IN PERCENT | -0.100 TO 0.100 | | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.001 | | RELIABILITY INDICATOR | ESTABLISHED | | UNPACKAGED UNIT WEIGHT | 1.6 GRAMS | | SPECIFICATION/STANDARD DATA | 81349-MIL-R-55182/6 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | AXIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 175.0 | | TERMINAL LENGTH | 1.000 INCHES MINIMUM AND 1.625 INCHES MAXIMUM | | TERMINAL TYPE | WIRE LEAD | | TEST DATA DOCUMENT | 81349-MIL-R-55182 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|