|
|
|
National Stock Number:
5905-01-347-1991
Federal Supply Class:
5905
National Item Identification Number:
013471991
Description:
RESISTOR NETWORK,FIXED,FILM
Detail:
An arrangement of multiple fixed resistive elements or discrete resistors permanently encased, encapsulated, or potted together, to form an inseparable unit. The resistive elements, consisting of a thin layer of conductive material deposited on or fused to an insulating base, usually are electrically connected to each other and may be arranged in any circuit configuration. Excludes RESISTOR, FIXED (as modified); RESISTOR ASSEMBLY; RESISTOR NETWORK, FIXED-VARIABLE; and RESISTOR SET, MATCHED.
|
Manufacturer Information:
| 4989AJ-06-1001BB | 11502 | INTERNATIONAL RESISTIVE COMPANY, INC. DIV WIRE AND FILM TECHNOLOGIES (WAFT) | | RN08-02 | 08748 | ELDEC AEROSPACE CORP | | RN08-02 | 91637 | VISHAY DALE ELECTRONICS, LLC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 1.000 KILOHMS | | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | -55.0 | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 125.0 | | BODY HEIGHT | 0.240 INCHES MAXIMUM | | BODY LENGTH | 0.810 INCHES MAXIMUM | | BODY WIDTH | 0.050 INCHES MINIMUM AND 0.098 INCHES MAXIMUM | | IDENTICAL VALUE RESISTOR QUANTITY | 4 EACH RESISTOR | | INCLOSURE METHOD | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 0.800 TOTAL NETWORK | | PROPRIETARY CHARACTERISTICS | PACS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -0.100/+0.100 | | STYLE DESIGNATOR | SINGLE INLINE | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -25.0/+25.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0/+125.0 | | TERMINAL LENGTH | 0.125 INCHES MINIMUM AND 0.175 INCHES MAXIMUM | | TERMINAL QUANTITY | 8 | | TERMINAL TYPE | TERMINAL TYPE PER BODY STYLE | | TERMINAL WIDTH | 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM | | TEST DATA DOCUMENT | 08748-RN08 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|