|
|
|
National Stock Number:
5365-01-538-9639
Federal Supply Class:
5365
National Item Identification Number:
015389639
Description:
SPACER,PLATE
Detail:
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
|
Manufacturer Information:
| 02502027-1 | 12339 | DRS TRAINING & CONTROL SYSTEMS, LLC |
|
Techincal Specification:
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A240 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5511 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 304L | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHIM, AFT | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 16.890 INCHES MINIMUM AND 16.950 INCHES MAXIMUM | | OVERALL THICKNESS | 0.021 INCHES NOMINAL | | OVERALL WIDTH | 3.350 INCHES MINIMUM AND 3.410 INCHES MAXIMUM | | SPECIAL FEATURES | ITEM HAS A TAB AT THE TOP RIGHT CORNER AND ANOTHER AT THE BOTTOM LEFT CORNER, BOTH MEASURES 1.25" (ALONG THE LENGTH) BY 1.62" (ALONG THE WIDTH) WHICH MATE TO ONE ANOTHER WHEN ITEM IS FORMED INTO A CIRCULAR SHAPE AND THEN ITWILL HAVE A 5.00 IN. I.D. | | STYLE DESIGNATOR | RECTANGULAR |
|
|