|
|
|
National Stock Number:
5365-01-529-9812
Federal Supply Class:
5365
National Item Identification Number:
015299812
Description:
SHIM
Detail:
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
|
Manufacturer Information:
| 5HC12064-251 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| CONSTRUCTION | LAMINATED | | LAMINATION QUANTITY | 4 | | LAMINATION THICKNESS | 0.003 INCHES NOMINAL | | OVERALL LENGTH | 2.000 INCHES NOMINAL | | OVERALL THICKNESS | 0.125 INCHES NOMINAL | | OVERALL WIDTH | 2.000 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-22499,COMP 1,TY 1,CL 2 MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM | | SPECIAL FEATURES | MADE FROM 2 IN. BY 2 IN. STOCK;C/O 2 HOLES 0.124MIN/0.129MAX DIA;DISTANCE FROM CENTER OF LEFT HOLE TO LEFT EDGE IS 0.25 IN.;CENTER TO CENTER DISTANCE BETWEEN TWO HOLES IS 0.50 IN. DIA;DISTANCE FROM CENTER HOLES TO BOTTOM EDGE IS 0.41 IN.;TOP LEFT AND RIGHT EDGES ARE ROUNDED | | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
|
|